If you have considered pressure-washing your house on your own, the time will depend on factors like the size of the home and the effectiveness of the equipment and cleaning solutuions you select.
What affects how long it takes to pressure wash a house?
The size of a house will impact the time required to complete the job. Larger homes will take longer than smaller homes, and moreover, new homes will require more time than older ones. Houses that are 1800 square feet or less can be pressure washed in about 30-60 minutes while houses that are 2000 square feet or larger may require over three hours.
Do you have help to pressure wash your house?
In order to complete the job as quickly as possible, several workers are needed. However, with fewer people working on the project, it’s going to take a lot longer and be more tedious. A team from a pressure washing company can be your best option for a faster and more efficient clean.
How to Pressure Wash a House Fast
Experienced workers will take less time to clean your house. Figuring out methods to clean more efficiently and what substances to use is a key part of pressure washing expertise and starts with experience and/ or training.
What equipment is used to pressure wash a house?
The right pressure washing equipment makes the job much more effective. If your house has delicate surfaces, you’ll need a pressure washer with a much lower PSI to avoid damaging your deck or house. Choosing the right tools is critical so consider the intended use of the machine before you decide on one.
Steps for pressure washing a house
There are many steps to pressure wash your house which should be followed systematically. Following the steps below will help to avoid damaging surfaces or other equipment like satellite dishes.
Step 1: Protect your fixtures
To prevent fixtures from being damaged, they should all be covered and protected with materials like drop cloths and plastic covers that are watertight, by taping the cover down. Preventing these damages also helps make cleaning easier.
Step 2: Scrub Mildew
Power cleaners often can’t remove tough spots such as mildew because they cause more damage than cleaners like multipurpose siding cleaners. Before you use machines, it’s important to first scrub the spot gently with a brush to remove dirt and then rinse with water before actually pressure washing with a mildew-resistant cleaner.
Step 3: Choose Your Cleaning Solution
Cleaning solutions must be carefully mixed to create concentrations for different parts of the house. The types of products are still steeped in decisions though, with products that could corrode your walls causing them more harm. While you mix these chemicals, also make sure you check the mixing ratio of the ingredients to get a perfect mixture for easy cleaning. Similar to doing your laundry, adjusting your pressure washing cleaning solution for the surface and the type of dirt you are cleaning can be critical.
Step 4: Connect Your Water Supply
The amount of time it will take to pressure wash a house depends on a few different factors. You have to figure out which type of water you should be using, the types of attachments you have available for your power washer, and if you have hard water, how long it would take for it to corrode your home.
Step 5: Choose Your Pressure Washing Distance
One of the most important steps when pressure washing a house is to find the right distance from which you’re comfortable. The water’s force should be just enough to clean the wall surface without damaging it. For the best experience, find a distance that will allow for proper water pressure.
Step 6: Start From Top To Bottom
Washing from top to bottom is best practice when pressure washing your house to ensure efficiency. First, you should spray the roof overhangs, underhangs, gutters, and roof. Spray water downwards during rinsing or pressure washing. Once complete, rinse with plain water from the hose pipe to clean all the surfaces.
Depending on the size of your house and the experience you have in using pressure cleaning equipment, you will be able to gauge how long it can take you for this process. Pressure washing a house is often best handled by an experienced cleaning company. If you prefer to DIY though, check first to make sure you have the right equipment and lots of help. Happy cleaning!
